Find activities

48 results

  • 4 Joint Australian/New Zealand Adoptions of ISO/IEC Technical Specification(Public Consultation)

    We are consulting on 4 adoptions of the ISO/IEC technical specifications, proposed for publication as joint Australian and New Zealand technical specifications: SA/SNZ TS ISO/IEC 33010 Information technology - Process assessment - Guidance for performing process assessments SA/SNZ TS ISO/IEC 33060 Information technology - Process assessment - Process assessment model for system life cycle processes SA/SNZ TS ISO 19124.2 Geographic information - Calibration and... More
    Closed 12 February 2026

  • DZ SNZ 3404:2026 Durability requirements for steel structures and components

    We are consulting on DZ SNZ 3404:2026 Durability requirements for steel structures and components The proposed DZ SNZ 3404:2026 standards was prepared by P3404 - Revision Group. The DZ SNZ TS 3404 Committee is pleased to present the fully revised and updated Durability Requirements for Steel Structures and Components standard, previously designated as SNZ TS 3404. This document has now been elevated to a full standard level, as Part 3 of the NZS 3404 Steel Structures... More
    Closed 20 March 2026

  • DZ 5210: 2026 High temperature heat pumps

    To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback. By clicking on the designation of the standard below, you’ll be taken to a new page in our webshop where you can view the full details of the standard. DZ 5210:2026 High temperature heat pumps Please note all submissions need to be submitted through... More
    Closed 20 March 2026

  • Joint Standards Proposed for Reconfirmation

    Overview Standards New Zealand and Standards Australia periodically review joint AS/NZS standards that are over 5 years old to ensure they remain fit for purpose and meet industries’ needs. As part of this process, a number of standards have been proposed for review by Standards Australia that we now need your feedback on. If you use these standards, we need you to tell us: Should these be reconfirmed, revised or withdrawn? Are they still fit for purpose? Do you use... More
    Closed 4 April 2026

  • Joint standards intended for withdrawal

    We are considering the future status of the following standards and are seeking your feedback to help determine our next steps. These standards are being reviewed in conjunction with Standards Australia and may be proposed for withdrawal due to one or more of the following reasons: The standard no longer reflects current industry practice or research. It is unsuitable for use in new or existing applications (including products, systems, or processes). It does not align... More
    Closed 6 April 2026

  • NZS 4411 Environmental standard for drilling of soil and rock

    Overview We are consulting on the draft DZ 4411 Environmental standard for drilling of soil and rock. What is NZS 4411about? The objective of NZS 4411 is to protect groundwater resources and preserve water quality, thereby safeguarding groundwater from potential contamination associated with drilling activities. The standard aims to provide: A comprehensive framework for ensuring drilling activities are conducted in a manner that minimises risk to... More
    Closed 10 April 2026

  • DZ PAS 4509 Firefighting Water Supplies – Code of Practice

    Overview We are consulting on the Draft PAS 4509 Firefighting Water Supplies – Code of Practice. What is the PAS about? This Code of Practice aligns water supply resources with the operational requirements of Fire and Emergency New Zealand, providing a benchmark for infrastructure design that supports effective firefighting. This Code of Practice sets out what constitutes a sufficient minimum supply of water pressure and volume for... More
    Closed 29 April 2026

  • AS/NZS IEC 62676.2.2:2020 Intended for Withdrawal

    We are considering the future status of the following standards and are seeking your feedback to help determine our next steps. These standards are being reviewed in conjunction with Standards Australia and may be proposed for withdrawal due to one or more of the following reasons: The standard no longer reflects current industry practice or research. It is unsuitable for use in new or existing applications (including products, systems, or processes). It does not align... More
    Opened 4 May 2026

  • Aged Standards - Electromagnetic Compatibility (TE-003) Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - Lighting EL-041 Standards Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - Alarm and Electronic Security Systems (EL-031) Standards Proposed for Reconfirmation and Withdrawal

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - Electrical Accessories (EL-004) Standards Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - Electrical Equipment in Mines and Quarries (EL-023) Standards Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - Methods of test for pulp and paper (PK-019) Standards Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - Environment Sector Standards Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - Machinery Sector Standards Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - Assistive Technology (ME-067) Standards Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026

  • Aged Standards - EL-042 and EL-05 Standards Proposed for Reconfirmation

    The publications listed at the below link have been reviewed by the relevant active technical committee (and other stakeholders where appropriate) and subsequently endorsed to be "reconfirmed" as they are valid, technically correct and reflective of current practice. To support your review, we’ve made the full text of each standard available on our website for the duration of the consultation. This gives you full access to the documents and context needed to provide informed feedback.... More
    Opened 17 April 2026
48 results. Page 2 of 2